Reliable boiler installation, repair, and maintenance services near you
Boiler Services In Orem, Utah
At Orem Heating and Air Pros, we provide expert boiler services including installation, repair, and maintenance for homes and businesses. Whether your boiler is not heating properly, making unusual noises, or needs a full replacement, our experienced technicians ensure safe, efficient, and long-lasting solutions to keep your property warm and comfortable.
Boiler Repair and Installation in Orem, Utah – Orem Heating and Air Pros
We are your local Orem Heating and Air Pros, and boiler service is a specialty we have built real experience in through years of working in homes throughout Orem and the surrounding Utah Valley. Boiler systems are less common than forced-air furnaces in this area, but they are present in a meaningful number of older Orem properties — particularly homes built before forced-air heating became the standard approach. When a boiler has a problem, it affects the whole home’s heating, and finding a company that actually understands hydronic heating systems rather than guessing at them makes a significant difference.
We are the trusted local boiler repair and installation experts in Orem. We diagnose and repair boiler systems that are making noise, losing pressure, failing to distribute heat through zones, or refusing to fire. We also install new boiler systems for Orem homeowners who are replacing aging equipment or upgrading to a more modern and efficient hydronic heating setup. We approach every boiler job with the systematic knowledge this type of system requires.
If you smell gas or suspect a gas leak, go outside immediately and call 911 – this is a serious emergency that needs urgent attention from the gas company.
Contact us today to schedule your boiler service in Orem.
Our Boiler Repair and Installation Services in Orem, Utah
Boiler Repair
A boiler system delivers heat differently than a forced-air furnace — instead of pushing warm air through ducts, it heats water and circulates it through radiators, baseboard units, or radiant floor tubing. When a boiler is working well, the result is a distinctive, even warmth that many Orem homeowners find genuinely comfortable. When it has a problem — a failing circulator pump, a zone valve that will not open, a pressure issue, or a heat exchanger problem — the whole home heating system is affected. We have repaired boilers in Orem properties of all ages, and we understand how to work through hydronic systems methodically.
Common Problems We Fix
- Banging, kettling, or gurgling sounds coming from the boiler during operation
- System pressure drops repeatedly and needs manual refilling to restore function
- One or more heating zones are cold while others are working correctly
- Radiators or baseboard units throughout the home are cold despite the boiler firing
- Boiler fires up but shuts off on a limit before the home reaches the setpoint
- Water leaking from the boiler body, expansion tank, or distribution piping
- Circulator pump is running but the water is not moving through the system
- Pilot light will not stay lit on older standing-pilot boiler systems
- Visible corrosion on the boiler or distribution system components
Boiler repair in Orem homes requires a systematic approach to a system that has more components than a typical forced-air furnace. We start with a complete assessment — checking system pressure and expansion tank pre-charge, testing circulator pump output and temperature differential across zones, inspecting zone valve operation, examining the heat exchanger for corrosion or scaling, and checking the flue system for proper draft. The kettling or banging sounds that Orem homeowners sometimes describe usually indicate scale buildup on the heat exchanger surfaces, trapped air in the system, or an expansion tank that has lost its air charge and is no longer properly absorbing pressure swings. Each of these has a different repair, and identifying the correct one requires the right diagnostic process rather than guesswork. We find the actual cause and repair it thoroughly, because a boiler that seems fixed but still has an underlying issue will keep causing problems through the winter season. If you smell gas or suspect a gas leak, go outside immediately and call 911 – this is a serious emergency that needs urgent attention from the gas company.
Boiler Installation
Boiler installation in an Orem home is a project that requires specific knowledge of hydronic heating system design — how to size the boiler correctly for the heat load, how to configure the distribution system for efficient zone control, and how to handle the gas and venting connections with the same rigor we apply to any gas appliance. We have installed boiler systems in Orem properties where an aging unit has reached end of service life and in homes where a different type of heating is being replaced with a hydronic system for the first time. The even, comfortable heat that a well-designed boiler system delivers is worth the care a proper installation requires.
Common Problems We Fix
- Existing boiler is over 20 years old and repairs have become frequent and costly
- System efficiency has declined significantly and a modern high-efficiency boiler is the right upgrade
- Repeated repairs have addressed symptoms without resolving the underlying system deterioration
- Heat exchanger corrosion has reached the point where the system is no longer safe or reliable
- The existing boiler output is no longer adequate for the home’s current heating load
- Zone control system needs a full upgrade alongside the new boiler installation
- Homeowner is adding radiant floor heating to a renovation and needs a boiler to support it
- Converting from an older steam boiler to a modern hot water system
- New construction or full gut renovation requiring a complete hydronic system installation
Every boiler installation in Orem starts with a proper heat loss calculation for the home. This determines the correct output capacity — too large and the boiler short-cycles and operates inefficiently, too small and it runs constantly and still cannot keep up on the coldest days. We design the distribution system to match the boiler’s output, ensuring that the zone piping, the circulator pump selection, and the expansion tank sizing all work together correctly. For homes with multiple zones, we configure the zone controls to deliver independent temperature management for each area while protecting the boiler from the short-cycling that can occur when small zones call for heat independently. We install the gas connection, verify gas pressure, connect the flue venting with correct clearances and termination, fill and purge the system of air, set the operating pressure and temperature parameters, and run the full startup process before we consider the installation complete. Modern high-efficiency condensing boilers require attention to the condensate drain system as well — we ensure the condensate is routed correctly and draining properly, because a blocked condensate path causes the boiler to fault out on a safety lockout. If you smell gas or suspect a gas leak, go outside immediately and call 911 – this is a serious emergency that needs urgent attention from the gas company.
Why Orem Homeowners Choose Orem Heating and Air Pros
Real Hydronic System Knowledge
Boiler systems are different enough from forced-air equipment that general HVAC knowledge is not sufficient on its own. Circulator pumps, expansion tanks, zone valves, air separators, and the specific pressure and temperature relationships in a hydronic system require hands-on experience to work with accurately. We have that experience from years of boiler work in Orem homes and the surrounding area, and it shows in the quality and accuracy of our diagnostics and repairs.
Systematic Diagnosis Rather Than Component Swapping
Boiler problems are often interconnected. A pressure loss issue might be the expansion tank, a leaking zone valve, an auto-fill valve that is not closing properly, or a developing leak somewhere in the distribution piping. Replacing the expansion tank without checking the other possibilities misses the actual cause in many cases. We diagnose the system as a whole — not just the component that has obviously stopped working — because a complete diagnosis leads to a complete repair.
We Respect Older Orem Homes and Their Systems
Some of the Orem homes with boiler systems are genuinely older properties with original radiators, original distribution piping, and decades of accumulated character. We work carefully in these homes, treating the existing system with respect and making repair recommendations that account for the age and condition of the components we are not replacing. We do not recommend unnecessary work, and we do not damage things that are working fine in the process of fixing what is not.
Safety Is Built Into Every Boiler Job
Gas connections, flue systems, and operating pressure all require proper attention on any boiler service call or installation. We test gas connections before system startup, verify flue draft and clearances, set operating pressure and temperature within safe parameters, and confirm that all safety devices — pressure relief valve, high-limit, low-water cutoff — are functional and properly configured. These checks are not optional on any boiler job we do in Orem.
Clear Communication About Repair vs. Replacement
When an Orem homeowner calls us about a boiler problem, one of the most important things we do is give them an honest picture of whether repair or replacement makes more sense. A boiler that is 15 years old with a modest problem is worth repairing. One that is 25 years old with significant heat exchanger corrosion and repeated failures is not. We give you a clear, honest assessment based on the actual condition of your equipment — not a recommendation shaped by what is more profitable for us.
Our Service Process
Step 1 – Contact Us and Describe the Boiler Issue
Reach out by phone or through our website. Tell us what the boiler is doing — unusual sounds, pressure problems, zones not heating, or complete failure. We ask a few questions about your system and home so we can arrive prepared. For urgent situations in Orem, we prioritize your call accordingly.
Step 2 – Full Hydronic System Diagnostic
We inspect the complete system — boiler, expansion tank, circulator pumps, zone valves, distribution piping, flue system, and controls. We measure pressure, temperature differential, and pump output. We explain what we found in plain language before recommending any repair or replacement work.
Step 3 – Complete the Repair or Installation
With your approval, we complete the work. For repairs, we carry common boiler components so many fixes can be done in a single visit. For installations, we follow a complete process — from system design through commissioning — before considering the job done.
Step 4 – System Test, Verification, and Walkthrough
Before leaving your Orem home, we run the system through a complete operational verification — checking all zones, confirming proper pressure and temperature operation, and testing all safety devices. We walk you through the results and answer any questions.
Service Area in and Around Orem, Utah
We provide boiler repair and installation throughout Orem and the surrounding Utah Valley. Our primary service area includes Orem and Vineyard. We also serve Provo, Lindon, Pleasant Grove, American Fork, and Springville. Boiler-equipped homes are more common in some neighborhoods than others, and we know which areas of Orem are most likely to have this type of system.
If you have a boiler in your Orem home and are not sure whether we cover your specific location, call us. In most cases within the Utah Valley area, we can get to you.
Professional Boiler Repair and Installation vs DIY Attempts
Boiler systems occupy a specific category in home mechanical systems — they are complex enough that even handy homeowners with general mechanical skills will typically reach the limits of what they can diagnose and repair without specialized training. We want to be specific about what those limits are.
Gas connections and flue systems carry the same risks on a boiler as on any gas appliance. A gas connection that is not leak-tested before system startup, or a flue system that back-drafts combustion gases into the home, presents a genuine safety hazard. Boilers also operate under water pressure, and a system that is repaired without properly re-pressurizing and testing can develop a failure in the distribution system that goes unnoticed until it causes water damage. If you smell gas or suspect a gas leak, go outside immediately and call 911 – this is a serious emergency that needs urgent attention from the gas company.
The expansion tank is one of the most commonly misunderstood components in a hydronic system. Its job is to absorb the pressure increase that occurs as the system water heats and expands. An expansion tank that has lost its air pre-charge is no longer doing this job — and the result is a pressure relief valve that opens repeatedly, a system that keeps losing water, and operating conditions that stress every component in the circuit. Replacing an expansion tank without verifying the pre-charge of the new tank, or without checking whether the auto-fill valve and pressure relief valve are also contributing to the problem, often results in the same symptoms returning.
Circulator pumps, zone valves, and air separators all have specific diagnostic procedures that require the right tools and the experience to interpret what the measurements mean. A circulator that is running but not producing adequate flow, for example, could have a failed impeller, air locked in the circuit, a partially closed isolation valve, or a motor bearing that is on the way out. Each of these is a different repair, and identifying the right one requires proper diagnosis.
Boiler installation adds system design complexity — heat loss calculation, distribution design, zone control configuration, and commissioning — that is beyond what can be replicated from a manual or a video tutorial. Contact us today and we will handle your boiler work correctly and safely from start to finish.
Heating & Air Conditioning Services
Complete Home Comfort Solutions for Your Property
From heating system repairs to air conditioning maintenance and installations, our team has the tools and expertise to keep your home or business comfortable year-round. We deliver reliable, high-quality HVAC service you can count on.
We Deliver Expert Results
Don’t settle for temporary fixes. We combine years of hands-on experience with modern technology to deliver long-lasting heating and cooling solutions. Our team values your time, your comfort, and your property.
- Heating System Repair & Maintenance
- Furnace Repair & Installation
- Air Conditioning Services
- AC Repair & Tune-Ups
- HVAC Diagnostics & System Checks
- Indoor Comfort Solutions
Frequently Asked Questions
How do I know if my boiler needs repair or replacement?
Age and condition are the key factors. Most boilers last 20 to 30 years with proper maintenance, though efficiency and reliability typically decline in the later years. If your Orem boiler is under 20 years old and the problem is a failed pump, valve, or expansion tank, repair makes sense. If it is over 20 years old with heat exchanger corrosion or repeated failures, replacement is worth evaluating seriously. We give you an honest assessment based on the actual condition of the equipment.
Why is my boiler making a banging or kettling noise?
Banging or kettling sounds usually indicate scale deposits on the heat exchanger surfaces, trapped air in the distribution circuit, or an expansion tank that has failed and is allowing pressure to swing dramatically during heating cycles. All three are diagnosable and fixable. We identify the actual cause and address it so the system operates quietly and efficiently.
Why does my boiler pressure keep dropping?
Pressure loss in a boiler system usually comes from a leak somewhere in the distribution piping or connections, a pressure relief valve that is weeping and releasing small amounts of water, or an expansion tank that has lost its pre-charge and is allowing the relief valve to open during heating cycles. We trace the source of the pressure loss systematically before recommending a repair.
Can you service a steam boiler as well as a hot water boiler?
Yes. Steam systems are older technology found in some of Orem’s older properties, and they have their own specific failure modes and maintenance requirements. We work on both steam and hot water boiler systems in Orem and the surrounding area.
Why is only one zone of my boiler system heating while the others are cold?
Single-zone failure in a multi-zone boiler system is most often caused by a stuck or failed zone valve, a circulator pump that has failed for that zone’s circuit, or an air lock in the zone piping. We test each possibility systematically to find the correct cause before making a repair recommendation.
How often should a boiler be serviced in Orem?
Annually, before the heating season. A pre-season boiler service covers heat exchanger inspection, burner cleaning and adjustment, circulator pump evaluation, expansion tank check, pressure relief valve test, flue system inspection, and a full operational test. Boilers that are serviced annually consistently outlast those that are not.
Can I search for boiler repair near me and find someone who actually understands hydronic systems?
Searching for boiler repair near me returns results that may include general HVAC companies without specific hydronic system experience. We have worked on boiler systems in Orem homes specifically, and we bring the focused knowledge that these systems require. Not every HVAC technician is a boiler technician, and the difference matters in the quality of the diagnosis and repair.
What is the difference between a boiler and a furnace?
A furnace heats air and distributes it through ductwork. A boiler heats water and circulates it through radiators, baseboards, or radiant tubing. Boilers provide a different type of heat — often described as more even and comfortable — but require different service expertise. We work on both in Orem homes.
Can a boiler be upgraded for better efficiency?
Yes. Modern condensing boilers operate at 90 percent AFUE or higher, compared to 80 to 85 percent for older non-condensing units. The upgrade involves replacing the boiler and, in most cases, adding a condensate drain. For Orem homeowners with older boilers and significant heating loads, the efficiency improvement and the reliability of new equipment together make a strong case for replacement.
Do you handle radiant floor heating installation connected to a boiler?
Yes. Radiant floor systems are one of the applications where a boiler excels, and we design and install the boiler and distribution system together when Orem homeowners are adding radiant heat to a renovation project. Proper system design — including the right water temperature setpoints and zone controls for radiant loops — is critical to getting the performance these systems can deliver.
We are Orem Heating and Air Pros, and boiler service is something we genuinely specialize in. If your Orem home has a boiler — whether it is a 30-year-old cast iron unit that has been quietly heating the house for decades or a more recent system that has developed a problem — we have the experience to service it correctly. We do not guess at hydronic systems and we do not treat every boiler call like a forced-air job with different equipment. We bring the specific knowledge these systems require.
Contact us today and let us take care of your boiler repair or installation in Orem.
Zip codes we serve: 84057, 84058, 84059, 84097, 84601, 84604, 84606, 84042, 84062, 84003, 84004, 84660
